*****************************
Thermal steady state analysis
*****************************

Perform a thermal steady state analysis. Calculate the temperature distribution in the
model. 

=====
Loads
=====

Open the load case container, where load cases can be defined 
(CTRL+K on load case to configure).

-------------
Add load case
-------------

Add a load case to the load case container. To configure the load case, click CTRL+K
on the load case. 

^^^^
Link
^^^^

Define at which link the load is applied.

^^^^^^^^^^^^
Thermal load
^^^^^^^^^^^^

Define the thermal load that is applied to the system. Three types of thermal loads
can be defined.   

==========  ====================================================
Type        Thermal load
==========  ====================================================
Convection  Convection load applied to entity in [K]
Heat flux   Heat flux load apploed to entity in [W/m\ :sup:`2`\]
Heat flow   Heat flow load applied to entity in [W]
==========  ====================================================

-------------------
Add convection load
-------------------

Add a convection load to the load case.

------------------
Add heat flux load
------------------

Add a heat flux load to the load case.

------------------
Add heat flow load
------------------

Add a heat flow load to the load case.

===================
Axis position table
===================

---------------
Number of poses
---------------

Change the number of poses in the table. In the table the positions of the axes can be changed. 
MORe then performs a static analysis at every case defined. If the number of poses is 2, then 2 
static analyses will be performed. 

-----
Table
-----

For every pose the position of the axis can be defined. 

===============
Load case table
===============

---------------
Number of poses
---------------

Change the number of poses in the table. In the table weight of the loads can be changed. 
MORe then performs a static analysis at every case defined. If the number of poses is 2, then 2 
static analyses will be performed.

-----
Table
-----

For every pose the load can be defined.

=================
Start calculation
=================

Start the calculation of the thermal steady state analysis.