*********
Component
*********

.. 	toctree::
   :maxdepth: 1
   
   comp_structure/comp_structure
   comp_models/comp_models
   
==============	=======================================================================
Field			Action
==============	=======================================================================
Name			Name of the component
Color			Color of the component in (R,G,B)
Mass			Mass of the component                                                  
alpha			Mass proportional damping coefficient, multiplies mass matrix
beta			Stiffness proportional damping coefficient, multiplies stiffness matrix
Default system	Select which system is used for the mechanical or thermal calculations
==============	=======================================================================
   
============
Color scheme
============

=======  =====================  ===========  =============
Part     Motion                 Color        (R,G,B)      
=======  =====================  ===========  =============
Bed      No motion              Gray         (200,200,200)
X-Axis   X-direction            Red          (200,127,127)
Y-Axis   Y-direction            Green        (127,200,127)
Z-Axis   Z-direction            Blue         (127,127,200)
A-Axis   Turning around x-axis  Orange       (255,170,000)
B-Axis   Turning around y-axis  Light green  (170,255,000)
C-Axis   Turning around z-axis  Light blue   (000,170,255)
X-Screw  X Ballscrew	        Dark green   (127,000,000)
Y-Screw  Y-Axis Ballscrew       Dark green   (000,127,000)
Z-Screw  Z-Axis Ballscrew       Dark blue    (000,000,127)
=======  =====================  ===========  =============

   .. image:: media/colorscheme.png
      :alt: color scheme
      :scale: 50 %

============
Context menu
============

----------
Reset view
----------

Reset the the view.

-----------------------------
Set current pose as reference
-----------------------------

Set the current pose as the reference pose. 

-----------------------
Reset to reference pose
-----------------------

Reset the current pose to the reference pose.

--------------------
Reset to import pose
--------------------

Reset the current pose to the import pose.  

---------
Duplicate 
---------

Duplicate the component.

------------------
Reload ANSYS model
------------------

Reload the ANSYS model. It needs to be used if changes were applied to the geometry
or the mesh. Check if the interfaces are still correctly defined. 

------
Delete
------

Delete the component. 

---------------
Show/Hide model
---------------

Show/Hide the component.