Thermal loadcases#
Mechanical loads#
Add load#
Adds a load to the loadcase, which can then be configured.
Tabular data enabled#
Enables the use of data stored in the data tables to define loads (e.g. transient convection temperatures)
Link#
Define at which link the load is applied.
Thermal load#
Define the thermal load that is applied to the system. Three types of thermal loads can be defined.
Type |
Thermal load |
---|---|
Convection |
Convection load applied to entity in [K] |
Heat flux |
Heat flux load apploed to entity in [W/m2] |
Heat flow |
Heat flow load applied to entity in [W] |
Add convection load#
Add a convection load to the load case.
Add heat flux load#
Add a heat flux load to the load case.
Add heat flow load#
Add a heat flow load to the load case.